 |
3073型氣溶膠發生器是一種水下兩流噴嘴的氣溶膠發生器。顆粒濃度102 /cm3 ~ >107 /cm3，流量0.3 ~ 4.5 L/min可調。長壽命，低噪音無刷擺動活塞泵提供加壓空氣。流量設置在顯示器上，由噴嘴壓力傳感器和比例閥控制。3073型氣溶膠發生器是一種水下兩流噴嘴的氣溶膠發生器。顆粒濃度102 /cm3 ~ >107 /cm3，流量0.3 ~ 4.5 L/min可調。長壽命，低噪音無刷擺動活塞泵提供加壓空氣。流量設置在顯示器上，由噴嘴壓力傳感器和比例閥控制。
The Model 3073 is a high end test aerosol generator for low and high concentration polydisperse droplet aerosols. It generates submicron aerosols from oils, and from salt or PSL solutions. The innovative new flow control reduces power consumption and achieves highly stable low particle production rates, ideal for calibration of particle sizing instruments. Its compact and lightweight design coupled with battery operation make it a perfect fit for use in field test applications.
PRODUCT DETAILS
The Portable Test Aerosol Generator Model 3073 is an atomizer-type aerosol generator with a submerged two-stream nozzle. It generates particle concentrations from 102 /cm3 to >107 /cm3 and offers an adjustable flow rate from 0.3 to 4.5 L/min. A long-life, low-noise brushless swing piston pump provides pressurized air. The flow rate is set on the display and controlled with a nozzle pressure sensor and proportional valve. Solutions can be pre-mixed in a standard 100 mL laboratory glass bottle with DIN thread and quickly exchanged. When using it with an optional battery pack, it runs up to 8h (2h at full load).
APPLICATIONS
Calibration of particle sizing instruments
General purpose reproducible test aerosol generation
Tracer particle generation (seed particles)
HEPA/ULPA filter integrity testing
Cleanroom and safety cabinet validation according to ISO 14644-3
In-use acceptance testing of low- and high flow filters
Smoke detector testing
FEATURES & BENEFITS
Highly portable self-contained design
Continuously variable output flow rate from 0.3 to 4.5 L/min with improved accuracy and reliability
Suitable for PSL, various oils, and salt solutions
Interface supports remote control
Internal brushless pump for long life
Compact and lightweight design with integrated wide-range power supply
Optional battery for increased flexibility and field use
|
| ||||||||||||||
購買咨詢
（已有1條咨詢）商品評論
（已有0條評論）購買流程
1.購買產品：點擊“立即購買”→填寫產品數量、聯系方式并提交→會員顧問訂單處理→合同簽訂。
2.咨詢產品：請聯系會員顧問或致電會員客服電話。
3.如果您還不是我們的會員，請先注冊。
4.最小起訂數量：1 ，進口產品貨期，請跟產品擔當聯系！
品牌擔當：
投訴電話：17717909117
聯系方式: 電話：021-52069907 分機 或撥0轉總機,傳真：010-52060857
維修流程
- 1、技術溝通，初步判斷問題電話,與客戶進行初步溝通、了解并初步判斷儀器所出現的故障問題。
- 2、簽訂維修協議由我公司向客戶發送儀器維修協議，客戶需如實填寫內容并回傳以便我司對儀器做進一步判斷。
- 3、客戶郵寄儀器客戶可按照我司地址郵寄儀器，并將快遞單拍照發送至您的專屬客服進行備案。
- 4、詳細診斷機器故障我司收到郵寄儀器后會對郵寄的儀器進行拍照并開箱檢驗，對儀器做進一步故障判斷。
- 5、支付維修費用如客戶儀器在保修期內，我司不收取任何維修費，如客戶儀器在保修期外，我司會適當收取維修費。
- 6、郵寄儀器給客戶我司將維修好的儀器按客戶地址進行拍照并郵寄，自此雖維修協議終止，但我司將提供終身免費答疑及技術指導。
| Testo 340 煙氣分析儀 | Testo350 煙氣分析儀 | PMS塵埃粒子計數器 | TSI塵埃粒子計數器 | Lighthouse塵埃粒子計數器 | Metone塵埃粒子計數器 |
| HACH塵埃粒子計數器 | TSI氣溶膠發生器 | ATI氣溶膠發生器 | Palas氣溶膠發生器 | Topas氣溶膠發生器 | Palas靜電中和器 |
| Topas靜電中和器 | Grimm粒徑譜儀 | TSI粒徑譜儀 | Topas粒徑譜儀 | Palas粒徑譜儀 | TSI掃描電遷移率粒徑譜儀 |
| HTV 甲醛檢測儀 | HTV-M甲醛檢測儀 | TVOC 檢測儀維修 | Grimm掃描電遷移率粒徑譜儀 | Palas掃描電遷移率粒徑譜儀 | Brechtel掃描電遷移率粒徑譜儀 |
| TSI 8530粉塵儀 | TSI 8532粉塵儀 | TSI 8533粉塵儀 | Rad7 氡檢測儀 | TSI 8534粉塵儀 | Thermo PDR-1500粉塵儀 |
| ATI 2i光度計 | ATI氣溶膠稀釋器 | 風量罩 | 風速儀 | 空氣品質檢測儀 | EN779測試臺改造 |
| Dustmate 粉塵儀 | TSI 8108大顆粒氣溶膠發生器 | TSI 3450單分散氣溶膠發生器 | 車身氣密性檢測設備 | 風管漏風量測試設備 | 凝聚核粒子計數器校準裝置 |
| 粒子計數器校準裝置 | 更多型號請咨詢客服19mro@19mro.com |
相關商品