038A-2300 可重復使用的水過濾元件的外殼

038A-2300 可重復使用的水過濾元件的外殼

  可清洗再用

    預過濾器，這些新的元素，為自己付出的延長壽命的傳統過濾器。一個快速的清洗和沖洗過濾元件，以恢復其原來的狀態，為您節省過濾器更換和處理的成本。當顆粒的外表面，只是刪除了元素的住房，洗它，并返回它的住房沒有所需的工具。元素是由數百種薄聚丙烯（PP）開槽盤停止防止光盤滑落核心，并允許進行徹底清洗。停機時間約5分鐘。 
   更精細的過濾需求，選擇50微米的元素。要刪除最明顯的固體水，使用100微米的元素。對于那些時候，是必需的，只有相對粗過濾使用200微米的元素。 
各種元素的大小和住房樣式，以滿足您的需求。選擇10“，10”，20“10”和10“的元素元素的長度。來完成，準備用自己的苯乙烯丙烯腈（SAN）住房和PP雙開端蓋。 
   選擇“20”元素較大的工作。特殊設計安全地連接兩個10“的元素在SAN外殼用PP雙開端蓋。 
    使用10“的元素沒有與您現有的雙開高檔住房的外殼，或選擇從各種12 1/16”H，雙開口第256頁。外殼上 
    的最大壓力在65°F（18°C）是125磅。外殼最高溫度為125°F（52°C）;的元素的最高溫度為190°F（88°C）。

?

      Washable and reusable

    Used as prefilters, these new elements pay for themselves by extending the life of conventional filters. A quick wash and rinse restores the filtration elements to their original condition—saving you most of the cost of filter replacement and disposal. When particles build up on the outer surface, just remove the element from the housing, wash it, and return it to the housing—no tools required. Elements are made of hundreds of thin polypropylene (PP) grooved discs; a stop prevents discs from sliding off the core and allows for thorough washing. Downtime is approximately 5 minutes. 
For finer filtration needs, select the 50-μm element. To remove most visible solids from water, use the 100-μm element. For those times when only relatively coarse filtration is required, use the 200-μm element. 
A variety of element sizes and housing styles are available to meet your needs. Choose 5", 10", or 20" element lengths. The 5"and 10" elements come complete and ready to use with their own styrene acrylonitrile (SAN) housing and PP double open end cap. 
    Select the 20" element for larger jobs. A special design securely connects two 10" elements in SAN housings with a PP double open end cap. 
    Use the 10" elements without housings with your existing double open end housing or choose from a variety of 12 1/16" H, double open end housings on page 256. 
    Maximum pressure at 65°F (18°C) is 125 psi. Maximum temperature for the housings is 125°F (52°C); maximum temperature for the elements is 190°F (88°C).