Cole-Parmer VC505-230/50HZZ 230伏交流超聲波均質

Cole-Parmer VC505-230/50HZZ 230伏交流超聲波均質

處理小批量樣品250μL或大如19升/小時，使用可選的連續流動池

獨家能量（焦耳）顯示器提供最準確的方法，重現結果

開/關獨立的脈沖發生器，有助于防止過熱

用戶界面菜單驅動的提示所有功能，提供了直觀的指導

我們的超聲波處理器都能夠提供500瓦或750瓦的20千赫。建議使用500瓦的型號更小的體積，2英寸或更小的探針。建議使用750瓦的型號體積較大，3/4-探頭，連續流動池和杯號角。處理批次樣品為250μL小或大如19升/小時，采用連續流動池04710-91（單獨訂購）。密封器保護單元濕度，灰塵，污垢，和煙霧。單位監控功率（瓦）和能量（焦耳），100％自動調諧功能。脈沖發生器的獨立開/關，確保安全的治療方法對溫度敏感的樣品，而在高強度的處理和控制開/關循環從1到59秒。基于微處理器的定時器控制流量，1秒至10小時。定時器監視加工的時間和持續時間。

觸覺鍵盤，菜單式顯示和簡單的功能鍵相結合，方便用戶使用的系統。所有程控參數在屏幕上顯示易于閱讀，這樣你就可以不斷監測。調整汽蝕能源強度的可變振幅控制交付給你的樣品。功率量被傳遞到探頭被顯示兩個數字為條形圖。屏幕上查看選定的輸出電平。

包括：轉換器，工具包，腳踏開關連接，13毫米直徑（0.5“）探頭04710-31帶有可更換的筆尖，和一個6英尺長電源線插頭。

Process batch samples as small as 250μL or as large as 19 L/hr using optional continuous flow cell

Exclusive energy (joules) monitor provides the most accurate method to reproduce results

On/off independent pulser helps prevent overheating

User-friendly menu-driven prompts provide intuitive guidance through all functions

Our ultrasonic processors are capable of delivering 500 or 750 watts at 20 kHz. The 500-watt models are recommended for smaller volumes, and for probes of 1/2-inch or less. The 750-watt models are recommended for larger volumes, 3/4-inch probes, and the continuous flow cell and cup horn. Process batch samples as small as 250 μL or as large as 19 L/hr using the continuous flow cell 04710-91 (order separately). The sealed converter protects the unit from humidity, dust, dirt, and fumes. Units monitor both power (watts) and energy (joules), and feature 100% automatic tuning. The independent on/off pulser ensures safe treatment of temperature-sensitive samples while processing at high intensity and controls on/off cycles from 1 to 59 seconds. The microprocessor-based timer controls your processes from 1 second up to 10 hours. Timer monitors both the elapsed time and duration of processing.

The tactile keypad, menu-driven display, and simple function keys combine for a user-friendly system. All programmed control parameters are displayed on the easy-to-read screen so you can continuously monitor your process. Adjust cavitation energy intensity delivered to your samples with the variable amplitude control. The amount of power being delivered to the probe is displayed both digitally and as a bar graph. View selected output level on the screen.

What's Included:

converter, tool kit, foot switch connection, 13-mm dia (?") probe 04710-31 with replaceable tip, and a 6-ft cord with plug.