Masterflex 77964-10 I / P ?數字流程泵系統，高性能泵頭，115/230 VAC

Masterflex I / P ?數字流程泵系統，高性能泵頭，115/230 VAC

316不銹鋼外殼和鍵盤完全密封防止灰塵，水和化學清潔劑

流量范圍：0.01?8 LPM（0.002?2.1 GPM），包括I/P? 73管。流量取決于驅動器轉速和泵管尺寸。

分送：量升（或加侖）復制1免除至999,999份;或SEC時間的，每次分配：1到999,999秒。

六個字符的數字顯示4個不同的參數：

流速：0.1至26 LPM分配體積：10毫升至26,520毫升（以1毫升為單位）;復印：1至999,999重復;電機轉速：650轉1轉的分辨率

可逆3/8-hp無刷電機免維護，額定連續工作。可在兩個方向清洗

硬盤存儲每油管大小的一個校準值，以提高精度。

鍵盤鎖定/解鎖功能可以防止意外或篡改。

遠程控制功能，通過防水連接器（需要遠程電纜附件77300-32，單獨出售）速度控制輸入：0至20 mA，4至20 mA，0到10 V信號觸點閉合：抽方向/啟動/停止/素數;

轉速計輸出：0至20 mA，4至20 mA，0至10 V

驅動器接受三種不同的泵頭類型：標準，易裝?，和高性能。

I/P? Digital process pump system, High-Performance pump head; 115/230 VAC.

316 stainless steel housing and keypad are completely sealed for protection from dust, water, and chemical cleaners

Flow range: 0.01 to 8 LPM (0.002 to 2.1 GPM) with included I/P? 73 tubing. Flow rate depends on drive rpm and tubing size.

Dispense by: volume in liters (or gallons); Copy– 1 to 999,999 dispense copies; or SEC–time of each dispense: 1 to 999,999 seconds.

Six-character digital display of four different parameters:

Flow rate: 0.1 to 26 LPM; Dispense volume: 10 mL to 26,520 mL (in 1 mL increments); Copy: 1 to 999,999 repetitions; Motor rpm: 1 to 650 rpm with 1 rpm resolution

Reversible 3/8-hp brushless motor is maintenance free and rated for continuous duty. Run pump in either direction; purge tubing before or after pumping

Drives store one calibration value per tubing size for improved accuracy.

Keypad lock/unlock feature prevents accidents or tampering.

Remote control capabilities via water-resistant connector (requires remote cable 77300-32, sold separately)—Speed control input: 0 to 20 mA, 4 to 20 mA, or 0 to 10 V signals; Contact closure: pumping direction/start/stop/prime;

Tachometer output: 0 to 20 mA, 4 to 20 mA, or 0 to 10 V

Drive accepts three different pump head types: Standard, Easy-Load?, and High-Performance.