AMBERSIL DP200 400ML噴霧裝,大批量

AMBERSIL DP200 400ML AEROSOL 潤滑油

Ambersil DP 200 is a specialist air curing, dry film which provides a long lasting semi-permanent release coating. It is based on a high percentage mixture of silicone resins and provides a highly durable release film for many polymer types, natural and synthetic rubber and rotational moulding grades of Polythylene.

應用范圍：

Applications:

于空氣中固化，形成了一個半永久性的涂層，該涂層在滾塑行業作為一個有效的脫模劑。也用于模制工藝和材料，持久的脫膜。

Cures on exposure to air and forms a semi-permanent coating which acts as an effective release agent in the rotational moulding industry. Also highly useful for moulding processes and materials where a durable, long lasting release film is

required.

可作為模具印章或為后續的應用其他AMBERSIL脫模劑的底漆。輕輕噴涂，涂層均勻噴灑9“ - 12”（25 - 30厘米），，在室溫下固化約10分鐘，可通過加熱加速固化，在110℃約6分鐘。必要時重新應用。

Can be used as mould seal or as a base coat for the subsequent application of other Ambersil mould release agents. Spray a light, even coating from 9" - 12" (25 - 30 cm) and leave to cure for approximately 10 minutes at room temperature. Curing can be accelerated by heating at 110°C for approximately 6 minutes. Re-apply as necessary.