Skipper Plus 水分測定儀 MO-940201

Moisture can cause peeling and blistering of applied finishes and treatments, newly applied finishes can fail prematurely if the wood it is applied to is not sufficiently dry. Hidden or trapped moisture can lead to mold and biological growth.

Skipper Plus 還可以用來檢測泄漏和跟蹤他們上下甲板的源頭。

The Skipper Plus can be moved across the surface of the boat to moisture survey in a fast and thorough manner, detecting moisture non-destructively through paint and coatings on wood up to a depth of 1.25". The Skipper Plus can also be used to detect leaks and trace them to source both above and below decks.

The Skipper Plus Moisture Meter is Used for:

出現起泡之前早期檢測

鑒別受損區域

除濕和修理船體監測

干前預涂，檢查脫皮

Early detection before blistering appears

Identifying the affected area

Monitoring hull during de-humidification and repairs

Checking stripped or peeled areas for dryness prior to re-coating

木船無損檢測和測量濕度，GRP（玻璃纖維增??強塑料）船體，木質零件，部件，甲板等

針對不同的材料進行了表面水分的測試如硬木，玻璃鋼。

深層滲透信號通過更多物質，以檢測水分升高，而無需破壞或刺穿正在測試的材料

外部橡膠電極直接接觸被測最佳靈敏度、重復性和更大的信號穿透深度的材料

用于木材的5?30％的硬木讀數以及0到100的GRP和其他材料的比較數值

大而明確，易于閱讀顯示屏提供的有效讀數

持有允許用戶“凍結”數據功能,當面部看不到水分測定儀不適合讀取數據時，可以使用這一功能

高水分音頻警告音，可以開啟或關閉

在不使用時節省電池，自動電源切斷開關“關”

確定水分滲透的玻璃纖維船體的存在

確認木船是否是干油漆或清漆前

賽艇如攜帶多過量水分檢查

檢查甲板和艙壁泄漏

起泡之前檢查

確定水分受災程度

船體除濕監測

預涂前檢測

Non-destructive detection and measurement of moisture in wooden boats, GRP (Glass Reinforced Plastic) boat hulls, wooden parts, components, decks, etc.

Three measurement ranges optimized for testing of different materials such as hardwood, GRP and surface moisture

Deep signal penetration to detect elevated moisture through most covering and coating materials and deep into the core of composite hulls without having to damage or puncture the material being tested

External rubber electrodes in direct contact with material being tested for best sensitivity, repeatability and greater depth of signal penetration

Wide range of readings for wood of 5 to 30% on hardwood scale and 0 to 100 on comparative scale for GRP and other materials

Large, clear, easy to read display giving meaningful readings

Hold function enables user to "freeze" the reading, useful when taking readings in awkward places where the meter face may not be visible

High moisture audio warning tone that can be switched on or off

Automatic power cutoff switches "Off" when not in use to save Battery

Identify the presence of moisture osmosis in fiberglass hulls

Confirm if wooden boats are dry before painting or varnishing

Check if racing boats are carrying excess moisture weight

Trace deck and bulkhead leaks

Early detection before blistering appears

Identify extent of moisture affected area

Monitor hull during de-humidification

Check stripped areas prior to re-coating