今日推薦
 | 匯分FKC-I-B空氣浮游塵菌采樣器,浮游菌采樣器
|
 | 匯分7991粉塵氣溶膠發生器(炭黑,碳黑)
|
總共找到31652個商品
 | RS PTFE DRY FILM LUBRICANT 200ML AEROSOL |
|
| | TRI-FLOW INDUSTRIAL LUBRICANT 200ML AEROSOLTri-Flow is a Professional Quality multi-use P.T.F.E penetrating Lubricant. |
|
| | TRI-FLOW INDUSTRIAL LUBRICANT 4LT TUBTri-Flow is a Professional Quality multi-use P.T.F.E penetrating Lubricant. |
|
| | TRI-FLOW INDUSTRIAL LUBRICANT 500ML AEROSOLTri-Flow is a Professional Quality multi-use P.T.F.E penetrating Lubricant. |
|
| | UNIFLOR 8961MT GREASE 500GM JARUNIFLOR 8961MT is a PTFE thickened, medium viscosity, completely fluorinated grease intended for components where wide temperature and low torque are critical. |
|
| | AMBERSIL FORMULA 10 400ML AEROSOLAmbersil Formula Ten is a multi-purpose, heavy duty, silicone mould release agent. |
|
| | AMBERSIL FORMULA 2 RELEASE AGENT 500ML AEROSOLFORMULA TWO is a specialist silicone mould release agent for the effective release of rubber. It is based on silicone and has been formulated particularly for quick and efficient release of natural rubber and polymers with lower melt temperatures. |
|
 | AMBERSIL FORMULA 5 400ML噴霧裝Formula Five 是中型，干燥，非硅脫模劑。基于蠟/酯共混物，具有優異的脫模特性，可用于所有類型的熱塑性塑料，一些熱固性塑料和多種類型的橡膠。 |
|
| | AMBERSIL FORMULA 6 400ML AEROSOLFormula Six is a multi-purpose, medium duty, silicone mould release agent. |
|
 | AMBERSIL FORMULA 8 RELEASE AGENT 400ML噴霧裝FORMULA EIGHT是一種多用途，輕型，硅脫模劑。是非常有效的，然而也是多種類型塑料和橡膠模具成型加工的經濟的解決方案。 |
|
 | AMBERSIL PUR400 500ML噴霧裝PUR400是一種有機硅脫模劑，它已被專門配制用于脫模，自結皮彈性聚氨酯。 |
|
| | CILRELEASE 1711E 500ML AEROSOLCilrelease 1711E is a silicone based Aersol Release Agent for Epoxy Polyester Resin, Polyurethane and Rubber Compounds. |
|
| | FREKOTE 44NC RELEASE AGENT 5LTLoctite Frekote 44-NC is a release agent where a non-transferring release is necessary. This semi-permanent, non-migratory release system chemically bonds to the mold surface to form a micro thin film which is stable at temperatures exceeding most molding |
|
| | FREKOTE 55-NC RELEASE AGENT 5LTFreekote 55-NC is a release agent where a non transferring release is necessary. |
|
| | FREKOTE 700-NC RELEASE AGENT 5LT CANLoctite Frekote 700-NC offers excellent release properties for the most demanding applications and is a great all-purpose release agent. Frekote 700-NC? releases epoxies, polyester resins, thermoplastics, rubber compounds and most other molded polymers. |
|
| | FREKOTE 770-NC RELEASE AGENT 1LT CANFrekote 770-NC offers excellent release for various molding applications. 770-NC can be used for the release of epoxies, polyester resins, vinyl ester resins, thermoplastics, adhesives, and rotationally molded plastics. |
|
| | FREKOTE 770NC RELEASE AGENT 5LT CANLoctite Frekote 770-NC is a low odor, fast evaporating version of Frekote 700-NC. Frekote 770-NC offers excellent release for various molding applications and can be used as a direct replacement for Frekote 700-NC. |
|
| | FREKOTE B15 MOULD SEALER 1LT CANLoctite Frekote B-15 is formulated as a sealer for metal molds with micro porosity problems, small surface scratches or imperfections. Used in conjunction with other Frekote products, B-15 provides an excellent base coat enhancing the release advantages o |
|
| | FREKOTE FRP-NC RELEASE AGT 5LTLoctite? Frekote? FRP-NC is a semi-permanent release interface specifically formulated for reinforced polyester gel coats. It provides minimal mould build-up thus eliminating buffing and cleaning between applications. Cure Time@ RT: 15-20 minutes Thermal |
|
| | MACWAX RELEASE AGENT 400ML AEROSOLMACWAX is a blend of waxes dispersed in rapid drying solvents and packed in aerosol form. This product does not contain CFCs, 111-trichloroethane or any other kind of halogenated solvent. |
|
| | LUBKO 1403PS REL/COAT 5LT CONTAINERLubko 1403 PS is a versatile Release Agent effective in most moulding operations (Rubber, Epoxy and other) and as mandrel lubricant, particularly steel mandrels, Can be applied on cold or hot surfaces with very good wetting properties. |
|
 | MILLER MS143H PTFE 1USG包裝這些新的和改進的米勒 - 斯蒂芬森脫模劑/干潤滑油，具有粒徑較小的PTFE，使用杜邦公司的特富龍化學物質,創建的低分子量聚四氟乙烯（PTFE）的含氟聚合物的懸浮液 - 白色，蠟 |
|
 | MILLER MS143XD USQ包裝這些新的和改進的米勒 - 斯蒂芬森脫模劑/干潤滑油，具有粒徑較小的PTFE，使用杜邦公司的特富龍化學物質,創建的低分子量聚四氟乙烯（PTFE）的含氟聚合物的懸浮液 - 白色，蠟 |
|
| | MONO COAT 6005A 500MLMono-Coat? 6005A is a semi-permanent, solvent-based release agent in aerosol spray cans designed for all rubber molding operations, except for silicon rubber. |
|
| | RENLEASE QZ 5101 900GM BOTTLERenLease QZ 5101, Film forming Poly-Vinyl-Alcohol (P.V.A.) release agent which can also be used as a RenLease sealer for porous surfaces. Produces glossy mouldings. |
|
