Masterflex? I / P ?洗下來的模塊化數字驅動器與控制器,壁掛式20-650轉,115V
Masterflex? I/P? wash-down modular digital drive with wall-mount controller, 20-650 rpm, 115V.
流量:0.12至13升/分鐘(0.03至3.5 GPM),流速取決于電機的轉速和泵管尺寸。
IP56額定電機和控制器清洗。保護其免受飛??濺的控制箱被繪鋁和水密接線連接端口。
電機和控制器是由一個25英尺(7.6米)耐風化電纜連接。
可逆的1/5-hp電機。抽吸前后均可清潔管,可從任意方向抽取液體。
控制:?jiǎn)?dòng),停止,反向,扭轉,校準,分配/復制。所有泵送參數輸入通過膜鍵盤。
遠程控制功能,通過控制器連接耐候性。必須購買遠程控制電纜(附件77300-32),下面單獨出售。速度控制輸入:0至20 mA,4至20 mA,0至10V。轉速計輸出:0至20 mA,4至20 mA,0?10V,2?10V,或TTL脈沖。抽水方向/啟動/停止:集電極開路或觸點閉合。
四位數的LED顯示屏上顯示4個不同的參數。流量(0.01,1,10升/分鐘;用油管大小自動調節);分配體積(0.1至999升);拷貝數(1到99的重復,超過1000升1.5毫升)電機轉速(1轉的分辨率)。
驅動器存儲用戶定義的一個校準值每油管尺寸。手動校準,以補償管路變化的或存儲在非易失性存儲器中,使用名義標定。
6英尺(1.8米)的線與插件-115 VAC:美國標準插頭; 230 VAC:歐洲插頭。
驅動器接受兩個不同的泵頭類型:標準或易裝?
清洗模塊化數字驅動器/分配器與他們的新產品以及改進的壁掛式控制器均防水噴灑,使驅動器和控制器使用后清洗。IP56額定電機和控制器。除了模塊化驅動器的所有功能【4模塊化數字驅動器增強了遠程控制功能。
Flow: 0.12 to 13 L/min (0.03 to 3.5 GPM); flow rate depends on motor rpm and tubing size.
IP56 rated motor and controller are wash-down. Protects against splashing—controller box is painted aluminum and has watertight ports for wiring connections.
Motor and controller are connected by a 25-ft (7.6-m) weather-resistant cable. Place components where convenient.
Reversible 1/5-hp motor. Purge tubing before or after pumping; pump fluid in either direction.
Controls: start, stop, prime, reverse, calibrate, and dispense/copy. Input all pumping parameters through the membrane keypad.
Remote control capabilities via weather-resistant connection on controller. Must purchase remote control cable (77300-32), sold separately below. Speed control input: 0 to 20 mA, 4 to 20 mA, or 0 to 10V. Tachometer output: 0 to 20 mA, 4 to 20 mA, 0 to 10V, 2 to 10V, or TTL pulse. Pumping direction/start/stop: open collector or contact closure.
Four-digit LED display shows four different parameters. Flow rate (0.01, 1, 10 L/min; autoranging with tubing size); Dispense volume (0.1 to 999 liters); Copy number (1 to 99 repetitions, 1.5 mL to over 1000 liters each); Motor rpm (1 rpm resolution).
Drive stores one user defined calibration value per tubing size. Calibrate manually to compensate for tubing variations or use the nominal calibrations stored in the nonvolatile memory.
6-ft (1.8-m) line cord with plug—115 VAC: U.S. standard plug; 230 VAC: European plug.
Drive accepts two different pump head types: Standard or EASY-LOAD?
Wash-down modular digital drives/dispensers with their new and improved wall-mount controller are protected from water spray enabling the drive and controller to be washed off after use. The motor and controller are IP56 rated. In addition to all of the features of the modular drives, wash-down modular digital drives have enhanced remote control capabilities.
產品規格 |
|
產品類型 |
Masterflex I / P驅動器 |
最大流量(毫升/分鐘) |
17000 |
最小流量(毫升/分鐘) |
120 |
控制類型 |
數字變頻調速 |
流量與I / P 26管(LPM) |
0.12?4.0 |
流量與I / P 26管(GPM) |
0.03至1.0 |
流量與I / P 70管(GPM) |
0.24至8個 |
流量與I / P 88管(LPM) |
0.5?13 |
流量與I / P 82管(LPM) |
0.4至13 |
流量與I / P 70管(LPM) |
0.24至8個 |
流量與I / P 88管(GPM) |
0.11?3.4 |
流量與I / P 82管(GPM) |
0.1?3.5 |
流量與I / P 89管(LPM) |
0.52至17 |
流量與I / P 73管(LPM) |
0.2?8 |
流量與I / P 73管(GPM) |
0.05至2.1 |
流量與I / P 89管(GPM) |
0.14?4.5 |
功率(安培) |
3.0 |
馬力(HP) |
1/5 |
電機功率(瓦) |
150 |
電機的正反轉 |
是 |
轉 |
20至650 |
IP防護等級(馬達) |
IP34 |
IP防護等級(控制器) |
IP56 |
膠的最小劑量(毫升) |
400毫升(I / P 26); 840毫升(I / P 70和I / P 73); 1360毫升(I / P 82和I / P 88); 1750毫升(I / P 89) |
尺寸(控制器) |
7.25“長x 11.75”寬x 9.75“高,(18.4厘米x 30.0厘米x24.8厘米) |
尺寸(馬達) |
14.125“L x 5.5625英寸寬x 6”高,(35.9厘米x 14.1厘米x15.2厘米) |
速度控制 |
±0.3% |
點膠精度(ML) |
±0.2毫升(I / P 26);±4.2毫升(I / P 70和I / P 73);±6.8毫升(I / P 82和I / P 88);±8.8毫升(89 I / P) |
接受泵頭號 |
2 |
接受泵頭類型 |
標準,易裝,高性能 |
品牌 |
Masterflex |
型號 |
07592-30 |
生產編號 |
07592-30 |
Specifications |
|
Product Type |
Masterflex I/P Drive |
Max flow rate (mL/min) |
17000 |
Min flow rate (mL/min) |
120 |
Control type |
Digital Variable Speed |
Flow rate with I/P 26 tubing (LPM) |
0.12 to 4.0 |
Flow rate with I/P 26 tubing (GPM) |
0.03 to 1.0 |
Flow rate with I/P 70 tubing (GPM) |
0.24 to 8 |
Flow rate with I/P 88 tubing (LPM) |
0.5 to 13 |
Flow rate with I/P 82 tubing (LPM) |
0.4 to 13 |
Flow rate with I/P 70 tubing (LPM) |
0.24 to 8 |
Flow rate with I/P 88 tubing (GPM) |
0.11 to 3.4 |
Flow rate with I/P 82 tubing (GPM) |
0.1 to 3.5 |
Flow rate with I/P 89 tubing (LPM) |
0.52 to 17 |
Flow rate with I/P 73 tubing (LPM) |
0.2 to 8 |
Flow rate with I/P 73 tubing (GPM) |
0.05 to 2.1 |
Flow rate with I/P 89 tubing (GPM) |
0.14 to 4.5 |
Power (Amps) |
3.0 |
Motor (hp) |
1/5 |
Motor (watts) |
150 |
Reversible motor |
Yes |
rpm |
20 to 650 |
IP rating (Motor) |
IP34 |
IP rating (Controller) |
IP56 |
Dispensing minimum dose (mL) |
400 mL (I/P 26); 840 mL (I/P 70 and I/P
73); 1360 mL (I/P 82 and I/P 88); 1750 mL (I/P 89) |
Dimensions (Controller) |
7.25"L x 11.75"W x
9.75"H, (18.4 cm x 30.0 cm x 24.8 cm) |
Dimensions (Motor) |
14.125"L x 5.5625"W x
6"H, (35.9 cm x 14.1 cm x 15.2 cm) |
Speed control |
±0.3% |
Dispensing precision (mL) |
±0.2 ml (I/P 26); ±4.2 ml (I/P 70 and
I/P 73); ±6.8 ml (I/P 82 and I/P 88); ±8.8 mL (I/P 89) |
No. of Pump heads accepted |
2 |
Type of Pump heads accepted |
Standard, Easy-Load, High-Performance |
Brand |
Masterflex |
Model |
07592-30 |
Manufacturer number |
07592-30 |
|
購買咨詢
(已有0條咨詢)商品評論
(已有0條評論)購買流程
1.購買產品:點擊“立即購買”→填寫產品數量、聯系方式并提交→會員顧問訂單處理→合同簽訂。
2.咨詢產品:請聯系會員顧問或致電會員客服電話。
3.如果您還不是我們的會員,請先注冊。
4.最小起訂數量:1 ,進口產品貨期,請跟產品擔當聯系!
品牌擔當:
投訴電話:17717909117
聯系方式: 電話:021-52069907 分機 或撥0轉總機,傳真:010-52060857
維修流程
- 1、技術溝通,初步判斷問題電話,與客戶進行初步溝通、了解并初步判斷儀器所出現的故障問題。
- 2、簽訂維修協議由我公司向客戶發送儀器維修協議,客戶需如實填寫內容并回傳以便我司對儀器做進一步判斷。
- 3、客戶郵寄儀器客戶可按照我司地址郵寄儀器,并將快遞單拍照發送至您的專屬客服進行備案。
- 4、詳細診斷機器故障我司收到郵寄儀器后會對郵寄的儀器進行拍照并開箱檢驗,對儀器做進一步故障判斷。
- 5、支付維修費用如客戶儀器在保修期內,我司不收取任何維修費,如客戶儀器在保修期外,我司會適當收取維修費。
- 6、郵寄儀器給客戶我司將維修好的儀器按客戶地址進行拍照并郵寄,自此雖維修協議終止,但我司將提供終身免費答疑及技術指導。
Testo 340 煙氣分析儀 | Testo350 煙氣分析儀 | PMS塵埃粒子計數器 | TSI塵埃粒子計數器 | Lighthouse塵埃粒子計數器 | Metone塵埃粒子計數器 |
HACH塵埃粒子計數器 | TSI氣溶膠發生器 | ATI氣溶膠發生器 | Palas氣溶膠發生器 | Topas氣溶膠發生器 | Palas靜電中和器 |
Topas靜電中和器 | Grimm粒徑譜儀 | TSI粒徑譜儀 | Topas粒徑譜儀 | Palas粒徑譜儀 | TSI掃描電遷移率粒徑譜儀 |
HTV 甲醛檢測儀 | HTV-M甲醛檢測儀 | TVOC 檢測儀維修 | Grimm掃描電遷移率粒徑譜儀 | Palas掃描電遷移率粒徑譜儀 | Brechtel掃描電遷移率粒徑譜儀 |
TSI 8530粉塵儀 | TSI 8532粉塵儀 | TSI 8533粉塵儀 | Rad7 氡檢測儀 | TSI 8534粉塵儀 | Thermo PDR-1500粉塵儀 |
ATI 2i光度計 | ATI氣溶膠稀釋器 | 風量罩 | 風速儀 | 空氣品質檢測儀 | EN779測試臺改造 |
Dustmate 粉塵儀 | TSI 8108大顆粒氣溶膠發生器 | TSI 3450單分散氣溶膠發生器 | 車身氣密性檢測設備 | 風管漏風量測試設備 | 凝聚核粒子計數器校準裝置 |
粒子計數器校準裝置 | 更多型號請咨詢客服19mro@19mro.com |
相關商品