Masterflex? 07589-30 I / P ?變速空氣動力車程

Masterflex? I / P ?變速空氣動力車程

流速：0.6至13 LPM（0.2?3.5 GPM），流速取決于管道尺寸。

使用調節器來調節空氣壓力，改變電機轉速。驅動器包括5微米的空氣過濾器和1/4'' NPT（F）的連接，自動潤滑，0至30 psi的壓力表和消音器的穩壓器。

空氣馬達啟動3/4-hp平穩，運行??涼爽，并且只需要很少的維護。空氣馬達產生更少的熱量比一個電動馬達。

彩繪不銹鋼外殼，IP34額定。從噴水保護。

驅動器符合CE符合歐盟機械指令的要求。驅動器符合歐洲社會的設計/制造標準。

連接到您現有的氣源或壓縮機。空氣軟管和壓縮機不包括在內。

驅動器接受兩個不同的泵頭類型：I / P標準或I / P易裝。

空氣動力驅動額定ATEX 2區批準;

EEX II 3 G C IIC T6

使用這種變速驅動器時，空氣動力的電力可能是不安全的或不切實際。為了安全操作，仔細從靜電接地保護。

 

產品規格
產品類型		的Masterflex I / P驅動器
最大流量（毫升/分鐘）		17000
最小流量（毫升/分鐘）		600
控制類型		模擬變速
流量與I / P 26管（LPM）		0.6到4.0
流量與I / P 26管（GPM）		0.2?1.0
流量與I / P 70管（GPM）		0.3至2.1
流量與I / P 88管（LPM）		2.5至13
流量與I / P 82管（LPM）		2至13
流量與I / P 70管（LPM）		1.2至8個
流量與I / P 88管（GPM）		0.5?3.5
流量與I / P 82管（GPM）		0.5?3.5
流量與I / P 89管（LPM）		2.6至17
流量與I / P 73管（LPM）		1.2至8個
流量與I / P 73管（GPM）		0.3至2.1
流量與I / P 89管（GPM）		0.7到4.5
馬力（HP）		3/4
電機功率（瓦）		560
轉		100至650
速度控制		±10％
接受泵頭號		2
接受泵頭類型		標準，易裝，高性能
牌		的Masterflex
模型		07589-30
制造商數量		07589-30

Masterflex? I/P? variable-speed air-powered drive.

Flow rate: 0.6 to 13 LPM (0.2 to 3.5 GPM); flow rate depends on tubing size.

Vary motor speed by using a regulator to adjust air pressure. Drive includes regulator with 5-μm air filter and 1/4'' NPT(F) connection, automatic lubricator, 0 to 30 psi pressure gauge, and muffler.

The 3/4-hp air motor starts smooth, runs cool, and requires little maintenance. Air motor generates less heat than an electric motor.

Painted steel housing; IP34 rated. Protects from water spray.

Drive meets EU machine directive requirements for CE compliance. Drive conforms to design/manufacturing standards of the European community.

Connect to your existing air supply or compressor. Air hose and compressor are not included.

Drive accepts two different pump head types: I/P Standard or I/P EASY-LOAD.

Air-powered drive is ATEX Zone 2 approved; rated

to EEX II 3 G c IIC T6

Use this variable-speed air-powered drive when electrical power may be unsafe or impractical. For safe operation, carefully ground to protect from static electricity.

 

Specifications
Product Type		Masterflex I/P Drive
Max flow rate (mL/min)		17000
Min flow rate (mL/min)		600
Control type		Analog Variable speed
Flow rate with I/P 26 tubing (LPM)		0.6 to 4.0
Flow rate with I/P 26 tubing (GPM)		0.2 to 1.0
Flow rate with I/P 70 tubing (GPM)		0.3 to 2.1
Flow rate with I/P 88 tubing (LPM)		2.5 to 13
Flow rate with I/P 82 tubing (LPM)		2 to 13
Flow rate with I/P 70 tubing (LPM)		1.2 to 8
Flow rate with I/P 88 tubing (GPM)		0.5 to 3.5
Flow rate with I/P 82 tubing (GPM)		0.5 to 3.5
Flow rate with I/P 89 tubing (LPM)		2.6 to 17
Flow rate with I/P 73 tubing (LPM)		1.2 to 8
Flow rate with I/P 73 tubing (GPM)		0.3 to 2.1
Flow rate with I/P 89 tubing (GPM)		0.7 to 4.5
Motor (hp)		3/4
Motor (watts)		560
rpm		100 to 650
Speed control		±10%
No. of Pump heads accepted		2
Type of Pump heads accepted		Standard, Easy-Load, High-Performance
Brand		Masterflex
Model		07589-30
Manufacturer number		07589-30