Masterflex 77240-10 L / S結構緊湊，變速泵。雙通道，115/230 VAC

Masterflex L / S結構緊湊，變速泵。雙通道，115/230 VAC

Masterflex L/S compact, variable-speed pump. Dual-channel, 115/230 VAC

泵整體磁頭提供可重復的低流速迅速設置

流速為0.8?105毫升/分鐘，這取決于驅動器轉速和泵管尺寸。

兩站管套很容易加載，不需要閉塞或張力調整

獨立的單圈速度控制和轉向泵時，正向/停止/反向切換保持速度設定開/關

通過泵后觸點閉合遠程啟動/停止

雙通道模式提供了兩個獨立的通道流同步

雙通道模式接受L/S ? 13和L/S 14兩管套

這種小巧型，可堆疊的泵為耐用的不銹鋼外殼，夾為環氧基涂層。鋁陽極氧化膜阻塞床波動快速裝載兩站管套。廣泛閉塞角度防止流體回流到額定壓力管。MAX按鈕運行電機全轉速或沖洗管。自潤滑熱塑性聚酯（Ertalyte ? TX）滾筒低摩擦，長時間耐磨，運行平穩，壽命長。

包括：雙電壓（115/230 VAC）臺式電源與IEC320/CEE22插座的。泵與附帶線/插頭組件運輸?shù)街付康貒?guó)

Pump with integral head delivers repeatable low flow rates with quick set up

Flow rate of 0.8 to 105 mL/min—depending on drive rpm and tubing size.

Two-stop tube sets are easy to load with no occlusion or tension adjustment

Separate single-turn speed control and forward/off/reverse switch—maintain speed setting when turning pump on/off

Remote start/stop via contact closure on back of pump

Dual-channel model delivers synchronous flow from two separate channels

Dual-channel model accepts L/S? 13 and L/S 14 two-stop tubing sets

This compact, stackable pump features a durable steel housing with chip resistant epoxy-based paint. The anodized aluminum occlusion bed swings open for quick loading of the two-stop tube sets. Wide occlusion angle prevents fluid backflow up to the rated pressure of the tubing. MAX button runs motor at full rpm to rapidly prime or flush tubing. Self-lubricating thermoplastic polyester (Ertalyte?TX) rollers are low-friction and long wearing for smooth operation and long life.

What's included: dual-voltage (115/230 VAC) benchtop power supply with IEC320/CEE22 socket. Pump is shipped with cord/plug assembly specific to country of destination.