Masterflex 07551-70可連接儀器的控制軟件，CD-ROM

Masterflex 可連接儀器的控制軟件，CD-ROM

Masterflex Linkable Instrument Control Software, CD-ROM

最多可控制25 MASTERFLEX ^? L / S ^? 07551系列驅動器或科爾-帕默Servodyne攪拌機的，直接從您的電腦

接口的07551系列通過RS-232或USB連接的計算機兼容的驅動器

定制軟件，以滿足您的應用需求：配藥，混合/稀釋，流量比例，單/多坡度;程序每個泵自動化50步。

平衡的界面，讓您免除了平衡，還具有重量比分配多個COM端口在您的PC上使用多個結余啟用

記錄選項讓你登錄在特定的時間間隔，在每個塊結束時，或者在每次運行結束

符合21 CFR第11部分：密碼保護和授權用戶列表，文件加密只允許授權用戶訪問。

基于Windows ^?的軟件有熟悉的下拉菜單和鼠標選擇圖標。

對于PC接口，通過RS-232端口和菊花鏈驅動器來驅動使用DB9 M / F電纜22050-54; PC接口，通過USB端口使用USB A / B型電纜22050-60。軟件提供的CD-ROM格式兼容的Windows XP與Windows 95/98/NT/2000/XP被推薦為最佳性能。

Control up to 25 Masterflex^? L/S^? 07551-series drives or Cole-Parmer Servodyne mixers directly from your PC

Interface the 07551-series computer-compatible drives via either RS-232 or USB connection

Customize the software to meet your application needs: dispensing, mixing/diluting, flow proportioning, and single/multiple slope gradients; program each pump to automate up to 50 steps.

Balance interface allows you to dispense off of a balance and also features weight-ratio dispensing; use of multiple balances is enabled with multiple COM ports on your PC

Logging options let you log at specific intervals, at the end of each block, or at the end of each run

Complies with 21 CFR Part 11: password protection and authorized user list, file encryption permits authorized user access only.

Windows^?-based software has familiar pull down menus and mouse-selectable icons.

For PC interface via RS-232 port and for daisy-chaining drive to drive use DB9 M/F cable 22050-54; for PC interface via USB port use USB Type A/B cable 22050-60.

Software is supplied in CD-ROM format; compatible with Windows 95/98/NT/2000/XP; Windows XP is recommended for best performance.

?