英國 EUROTHERM Nanodac無紙記錄儀

英國EUROTHERM nanoDAC無紙記錄儀

AC-powered, two PID loops, dual setpoint programmer, Modbus master & EtherNet/IP Client/Server, one logic, one relay and one DC output

交流供電，兩個PID回路，雙點編程，Modbus主站和以太網/ IP客戶機/服務器，一個邏輯，一個繼電器和一個DC輸出

高噪聲抑制，高度精確過程測量

兩個獨立的PID控制回路的選項

安全，二進制數據(UHH)或打開數據文件（CSV）

4個通用輸入通道125毫秒平行采樣

14個額外的渠道用作數學函數，累加器或計數器

8 Hz采樣和記錄速率

高密度I/O

USB和以太網端口

通過按鈕或iTools的軟件簡化配置，

水晶般清晰，全彩色顯示屏

節省空間，1/4 DIN面板安裝設計

nanodac無紙記錄儀,在一個小巧的1/4 DIN面板上，顯示安全記錄數據，圖形，以及可選的PID控制。全彩色3.5“TFT水晶般清晰的操作界面監測，控制過程。選擇查看橫向和縱向趨勢，條形圖或數值信息，并方便地顯示報警狀態和控制回路。四個前面板按鈕視圖之間簡單滾動。

nanodac包含50 MB的非易失性閃存數據存儲。所有過程數據不斷記錄這個內存和記錄儀上，提供多個歸檔策略，以確保您的數據永不丟失。可自動歸檔數據到數據庫，可拆卸的USB記憶棒，或以太網FTP站點。基于電腦工具支持記錄儀功能，可在你任何需要的時候提取數據。iTools的軟件（下載到www.eurotherm.com/products/controllers/itools）創建一個安全數據庫，根據需要圖表可回顧，打印和導出到其他電腦套件。所有的數據都是加密的二進制文件（UHH格式），并可以放到允許第三方數據備份的網絡上。

選擇兩個獨立的PIC控制回路，過程可靠控制。其功能包括一個最好的自動調諧設施以及抑制過沖（削減），電源波動，使用功率饋補償和線性，風扇，油，水冷卻。也可下載iTools軟件，nanodac記錄器/控制儀所創建的任何配置都可儲存，脫機修改，克隆用于其他Eurotherm儀器，節省您的時間和金錢。

可選的碳氧化鋯塊，通常使用控制回路，用于控制在爐中的碳百分比。nanodac還可用來作為碳監視器。nanodac與消毒器塊的擬用于與桌面消毒器保持和記錄溫度，在這個過程中，被集成到PLC處理清洗。型號70001-27 70002-43的可選消毒器或濕度塊。

Highly accurate process measurements with high noise rejection

Option of two independent PID control loops

Secure, binary data (UHH) or open (CSV) data files

4 universal input channels with 125 ms parallel sampling

14 additional channels for use as math functions, totalizers or counters

8 Hz sample and recording rate

High-density I/O

USB and Ethernet ports

Simple to configure via push buttons or iTools software

Crystal-clear, full-color display

Space-saving, 1/4 DIN panel-mount design

The nanodac paperless recorder features secure data recording, graphical display, and optional PID control—all in a compact 1/4 DIN panel-mount design. Full-color 3.5” TFT provides a crystal-clear operator interface for monitoring and process control. Choose to view your process information with horizontal and vertical trends, bar graphs or numeric values, and easily display the alarm status and control loops. Four front-panel push buttons allow simple scrolling between configured views.

Each nanodac contains 50 MB of nonvolatile Flash memory for data storage. All process data is continually logged to this memory and the recorder offers multiple archive strategies to ensure that your data is never lost. You can automatically archive data to a database, to a removable USB memory stick, or over the Ethernet via FTP site.

Recorder functionality is supported by PC-based tools to get data in the way you need it. iTools software (download from www.eurotherm.com/products/controllers/itools) creates a secure library for data from which charts can be reviewed, printed and exported to other PC packages as required. All data is encrypted in binary files (UHH format) and can be configured to run over the network which allows for a third data backup route.

Choose models with two independent PIC control loops for reliable control of your process. Functionality includes one of the best autotune facilities available along with overshoot inhibition (cutbacks); compensation for power fluctuations using power feedforward; and linear, fan, oil, and water cooling. Configuration is also done using the downloadable iTools software; any configuration created for a nanodac recorder/controller can be stored, modified offline, and cloned for use in other Eurotherm instruments, saving you time and money.

The optional carbon zirconia block, normally used with control loops, is used for percentage carbon control in furnace atmospheres; the nanodac can also be used as a carbon monitor.

The nanodac with sterilizer block is intended to be used with desktop sterilizers to maintain and recorder temperature during the process and is integrated with the PLC handling the cleaning.

See model numbers 70001-27 through 70002-43 for optional sterilzer or humidity block.