Omron E2E2X5C1 接近傳感器

Omron E2E2X5C1 接近傳感器

3線接近傳感器達到IP67

厚鍍鎳黃銅管扳手面，便于安裝

堅固密封內部電路承受沖擊和水沖洗IP67

改善厚鍍鎳黃銅管扳手面安裝強度

比CENELEC標準傳感范圍超過50%

內置電路和極性保護

標準尺寸 - M12，M18和M30

電壓范圍 -12-24VDC

輸出 - 常開和常閉

Omron的完整的線長距離，長管，圓筒狀，接近傳感器用于檢測有色金屬，高頻振蕩下，耐熱，抗化學物質，防水，性能比矩形傳感器好，比CENELEC標準小型款的感應距離遠達2倍。此技術降低維護成本，減少工件和傳感器之間的碰撞，避免損壞。憑借其堅固密封的內部結構與不銹鋼或鍍鎳黃銅結構相結合，這些接近傳感器可以承受沖擊，振動，機械磨損，壽命增加，最小化停機時間成本。這些傳感器也堪稱IP67，1200 psi的水沖洗，在M8，M12，M18和M30桶直徑。這些傳感器可在直流2線，3線DC和2線AC不銹鋼或鎳黃銅鍍。

3-Wire Proximity Sensors Meet IP67

Thick nickel-plated brass barrel has wrench flats for easy installation

Solid potted internal circuitry withstands shocks and water washdown to IP67

Improved nickel-plated brass (NPB) barrel strength

Up to 25% longer sensing range than CENELEC standards

Built-in circuit and polarity protection

Standard sizes - M12, M18 and M30

Voltage range - 12-24VDC

Output - Normally Open and Normally Closed available

Omron’s complete line of long-distance, long barrel, cylindrical style, inductive proximity sensors are used for detecting ferrous metals under standard conditions using high-frequency oscillation and resist heat, chemicals, and water better than rectangular sensors and provide up to twice the sensing distance in comparison with CENELEC standards. This longer sensing distance technology decreases costs with maintenance in reducing damage by avoiding collisions between the work piece and sensor. With its solid potted internal construction combined with its high-durability stainless steel or nickel-plated brass construction, these proximity sensors can withstand shock, vibration, and mechanical wear to provide increased life to minimize your downtime costs. Each of these sensors are also rated to IP67, 1200 psi water washdown and available in M8, M12, M18 and M30 barrel diameters. These sensors are available in 2-wire DC, 3-wire DC and 2-wire AC Stainless Steel or Nickel Plated Brass style barrels.